Challenges you will encounter with high speed machine vision applications and how to solve them!

Mikrotron high speed cameras

Mikrotron high speed vision solutions

High speed machine vision camera applications can solve many problems ranging from diagnosing high speed packaging production lines, sports analytics to droplet characterization in spraying applications to name a few.

These solutions require high frame rate cameras, but as in many machine vision applications, there are challenges that must be overcome to be successful.

4 challenges for high speed machine vision camera applications and solutions are presented below.

High Frame Rates are required to capture the event!
The key to high speed image capture is to stop motion by having enough image “frames” within short time periods to play them back slowly and analyze the event.  In order to capture these frames, first, you must have a fast image sensor, but then have the ability to offload the image data from the camera to the host computer.  Cameras using the CoaxPress (CXP) interface with appropriate sensors provide this solution.   Below is an example of achievable frame rates using a Mikrotron EOSens 3CXP camera.
mikrotron eosens 3cxp frame rates
Adequate light and a good image sensor is required! 
To achieve high frame rates, very short exposure times are required.  These short exposures do not allow much time for light to hit the image sensor.  In turn to overcome this, you need a strong light source and pixels that are very sensitive.  High speed Machine vision image sensors such as the Alexima AM41 and ON Semi LUPA3000 found in the Mikrotron EoSens 3CXP and EoSEns 4CXP cameras respectively solve this problem.

Image storage and an adequate computer is required for machine vision camera event capture.
The camera serves its function to capture frames, but typically with “event capture” applications, we need to save the data for playback at a slower frame rate.  In many cases, this requires adequate computer processing power, memory and solid state drives (SSD’s).  Depending on the application, computing systems with added features such as IO, encoder inputs, serial communication and Power over Ethernet (PoE) ports may be required.

High speed image recording software is needed.
Capturing the high speed video stream is not trivial, yet alone the playback.  Software packages such as Streampix by Norpix is a great solution for single up to multiple camera setups.
Contact 1stVision1stVision can customize a solution using off the shelf industrial components from Mikrotron (High speed cameras), Neousys (Industrial computers), Norpix (Software) and couple with the right lenses and accessories from frame grabbers to cables for your application.

Mikrotron has high speed machine vision camera solutions for many industries.  The following video’s demonstrate various solutions.

Automotive Industry – Metal Punch on Oil Filter

Pharmaceutical Industry – Automated filling of syringes

Packaging Industry  (Food and Beverage) – Trouble shooting packaging machinery

Packaging Industry (Blister Packs ) – Trouble shooting injection molding of blister packs

Contact us to talk to an expert!

1st Vision’s engineers have a combined experience of over 100 years of experience (yes, we are old, but can help you find the best solutions!).  We love talking about vision applications and can help provide a detailed solution.  Give us a call at 978-474-0044 or email us @ info@1stvision.com

Related Blog Posts & links

Video Tutorial – How to use industrial cameras for high speed imaging from machine vision to event capture

How do I sort through all the new industrial camera image sensors to make a decision? Download the sensor cheat sheet!

industrial camera decision

industrial imaging sensor decisionThe latest CMOS image sensor technology from Sony and ON-SEMI have continued to expand the industrial camera market.  Sony has now reached its 3rd Generation Pregius sensors in addition to adding the low light performer, Starvis sensor.  ON-SEMI has also continued with higher resolutions and has the next generation in the works.

Given all these new sensors, we are often asked, “What is the best image sensor and camera for my application”?  

Although there are many considerations in general on selecting a camera (i.e Interface, Size, Color vs Mono etc), its best to start with the characteristics of  image sensor and performance.  Knowing the answers to questions relating to amount of available light, dynamic range requirements, wavelengths involved, and the type of application, the right sensor can start to be identified.  From there, we can select a camera with the appropriate sensor fitting other requirements such as interface, frame rate, bit depths etc.

In order to help pick a sensor, its extremely important to have the image sensor data that can be found on the EMVA1288 data sheets.  We have continued compiling this data into a “cheat sheet” along with required lens recommendations and comments how how some sensors relate to each other and older CCD sensors for your download.

industrial camera image sensor cheat sheet

The data shows us that not all industrial camera image sensors are created equally!  Within the Sony Pregius sensors, there is 1st and 2nd Generation sensors both having unique characteristics.  The 1st Generation provided great pixel well depth and dynamic range with 5.86um pixels.  The 2nd generation came along with smaller 3.45um pixels,  improved sensitivity and lower noise, but less well depth.  The next generation will have the best of both worlds.. more to come on that front.

Using this data as an example, if we had an application with a “fixed” amount of light and wanted a relatively bright image (given a fixed aperture and just considering sensor characteristics), what sensor is best?   Answer:  We’d probably look at Model A with a smaller well depth as the pixel will start to saturate faster than Model C.  Or possibly we have a very small amount of light?  We’d start looking at absolute (abs) sensitivity which tells us the smaller # of photon’s, 1.1 in this case, starts to provide a useful signal.

Example comparisons: 
industrial imager comparison
Don’t let yourself get frustrated trying to figure this out on your own!    1st Vision’s engineers have combined experience in the machine vision and imaging market of over 100 years!   Our team can help explain the various technical terms mentioned in this post and help in selecting the best image sensor and camera for an application.

Contact 1st Vision

Related Blog posts

What are the attributes to consider when selecting a camera and its performance?

IMX174 vs Starvis IMX290 – Battle of the 2 Megapixel Image sensors – Sony Pregius IMX174 vs Starvis IMX290

IMX174 vs CMOSIS CMV2000 – CMOS battle between 2MP Sony Pregius and CMOSIS

IMX250 vs ICX 625 – 5MP’s sensor battle between Sony’s older CCD vs new CMOS model

What are global shutters and rolling shutters in machine vision cameras? How can we use lower cost rolling shutter cameras?

machine vision cameras shuttersWe often are asked the question, “What is the difference between a global and rolling shutter image sensor in machine vision cameras? ”  Although they both take nice pictures, they are very different image sensors with pro’s and con’s of each.  In the end, rolling shutter image sensors cost less, but are not always recommended for moving objects.

In this blog post, we will explain the differences between global and rolling shutter sensors used in machine vision cameras.  Additionally, we highlight how to use a rolling shutter camera capable of  “Global Reset”  providing low cost solutions for some applications with moving objects.

First, let’s explain the differences between rolling shutter vs global shutter image sensors in machine vision cameras.

Global Shutter:  Image sensors with a global shutter allow all of the pixels to accumulate a charge with the exposure starting and ending at the same time.  At the end of the exposure time the charge is read out simultaneously.  In turn, the image has no motion blur on moving objects.  This is given the exposure is short enough to stop pixel blur which is a topic for another blog.
Global shutter image

Rolling shutter:  Image sensors with a rolling shutter do NOT expose all the pixels at the same time.  Alternatively, they expose the pixels by row with each row having a different start and end time frame.  The top row of the pixel array is the first to expose, reading out the pixel data followed by the 2nd, 3rd & 4th row and so on.  Each of the rows start and end point have a delay as the sensor is fully read out.  The result of this on moving objects is a skewed image
Rolling shutter image

What are the Pro’s and Con’s of each type of shutter?

Global Shutter:  
Pro:  Freeze Frame images with no blur on moving objects.

Con:  Global shutter sensors require more complicated circuit architecture, thus limiting the pixel density for a given physical size.  In turn, sensors with a global shutter will have a larger image format driving up lens cost.  The complicated circuits also drive up the overall camera cost and will be more expensive vs a rolling shutter sensor.

Rolling Shutter:
Pro:  Rolling shutter sensors have a simpler design with smaller pixels, allowing higher resolution in a smaller image format allowing use of lower cost lenses. The simpler pixel design results in lower camera costs!.. For example, Dalsa’s 18MP Nano for < $600!

Con:  Image distortion occurs due to the row by row integration and offset on moving objects.  Smaller pixels may also require a higher quality lens which is commonly gauged by the lens Modular Transfer Function (MTF).  This is really dependent upon your application and can be discussed with a sales engineer In turn, there maybe a small trade off to consider.

Is there a way to use a lower cost rolling shutter camera on moving objects?  Absolutely using a Global Reset mode found in various image sensors.

Using a rolling shutter capable of a “Global Reset” such as the AR1820HS found in the 18MP Teledyne Dalsa Nano C4900 camera will eliminate the image distortion.

A typical rolling shutter image sensor as described above exposes sensor rows separately with a delay as depicted below.
rolling shutter mode

Using a rolling shutter with global reset mode, all rows start integrating at the same time as shown below eliminating the image distortion.  It is highly recommended however to use a dedicated strobe and sync with the start of image acquisition.  A gradient in the image brightness from top to bottom maybe seen if not with some pixel blur due to longer row exposure
rolling shutter with global reset mode

A great camera to consider is the 18MP Teledyne Dalsa Nano C4900 camera.  This camera features the ON-SEMI AR1820HS sensor with this capability.  With a price point of < $600, this makes it one of the lowest cost cameras per pixel on the market.

contact us

1st Vision has over 100 years of combined experience and can help you with camera, lens and other peripheral recommendations.  If you have questions regarding the various sensor shutters, please do not hesitate to contact us!

Be sure to read our related blog posts:

What is a lens optical format? Can I use any machine vision camera with any format? NOT!

Demystifying Lens performance specifications – MTF

Machine vision camera and lens selection tools including educational resources

1stvision industrial imaging components
Click on this picture to visit the new site now!

1stVision is making it easier in selecting industrial imaging components!   We have introduced new  machine vision camera and lens selector tools in our new website in addition to our educational resources.

5 ways to help in your industrial imaging selection are below:

  • Industrial machine vision camera selector:  Sort by manufacturer, interface, resolution, image sensor and image format to name a few.
  • Machine Vision lens selector:  Sort by manufacturer, focal length, format size, and lens quality
  • Technical Blog:  Posts are published monthly with educational content on cameras, image sensors, lenses along with technical primers and white papers.   The blog is categorized and allows you to search by a topic.
  • Knowledge Base:  This section contains technical articles on cameras, lenses, interfaces, vision standards and several other topics.

Watch our short video showing the key features in helping select cameras and lenses

Our combined staff has over 100 years of experience in the industrial imaging market!   We are well versed in the technical details, down to the camera sensor level and can help ensure the components you select are the best for your application.

Contact us to talk to an expert!