Teledyne DALSA Linea 9K Line scan NUV+VIS

Some applications require line scan cameras, where the continuously moving “product” is passed below a sensor that is wide in one dimension and narrow in the other, and fast enough to keep up with the pace of motion. See our piece on area scan vs. line scan cameras for an overview.

Teledyne DALSA’s new Linea HS 9k BSI Near ultraviolet (NUV) / visible camera is such a line scan camera, at 9216 x 192 resolution, and speeds to 400 kHz (mono mode) and 200 kHz (HDR mode).

Linea HS 9k BSI (NUV) / visible camera – Courtesy Teledyne DALSA

Visible spectrum as well as Near Ultraviolet (NUV)

The camera uses Teledyne DALSA’s own charge-domain CMOS TDI sensor with a 5×5 μm pixel size. In addition to the visible spectrum 400 nm – 700 nm, the sensor delivers good quantum efficiency to 300 nm, qualifying Near Ultraviolet (NUV) applications in the blue range as well.

Backside illumination enhances performance

Backside illumination (BSI) improves quantum efficiency (QE) in both the UV and visible wavelengths, boosting the signal-to-noise ratio.

Interface

The Linea HS 9k BSI camera uses the CLHS (Camera Link High Speed) data interface to provide a single-cable solution for data, power, and strobe. And Active optical cable (AOC) connectors support distances up to 100m. That avoids the need for a repeater while achieving data reliability and cost control. See an overview of the Camera Link standards. Or see all of 1stVision’s Camera Link HS cameras.

Applications

Delivering high speed high sensitivity images in low light conditions, the Linea 9k HS is used in applications such as:

  • PCB inspection
  • Wafer inspection
  • Digital pathology
  • Gene sequencing
  • FPD inspection
Linea 9k HS suitable for diverse applications – Courtesy Teledyne DALSA

Request a quote

The part number for the Linea HS 9k BSI camera is DALSA HL-HM-09K40H.

Lots of line scan cameras to choose from

Teledyne DALSA’s Linea families have a variety of interfaces, resolutions, frame rates, pixel sizes, and options. So if the new model isn’t the right one for your needs, browse the link at the start of this sentence, or ask us to guide you among the many choices.

1st Vision’s sales engineers have over 100 years of combined experience to assist in your camera and components selection.  With a large portfolio of cameraslensescablesNIC cards and industrial computers, we can provide a full vision solution!

About you: We want to hear from you!  We’ve built our brand on our know-how and like to educate the marketplace on imaging technology topics…  What would you like to hear about?… Drop a line to info@1stvision.com with what topics you’d like to know more about

(Visited 1,684 times, 1 visits today)