Canon EF mount fully integrated
The GT1930L EF is the first Allied Vision camera to receive an integrated Canon EF mount, allowing lens focus and iris to be adjusted through camera controls in the Vimba SDK or 3rd party software. No additional cabling is required, with lens drive power taken from camera power (PoE or Hirose powered). In the past, this has typically been accomplished via a third party mount adding more complexity to the overall solution.
Stay tuned as this is the first integrated Canon EF mount.. but not the last! Additional camera models will soon follow.
The GT1930L EF is equipped with a Sony IMX174 Pregius™ global shutter CMOS sensor with a resolution of 1936 x 1216 pixels (2.35 MPixel) and frame rate of 50.7 fps (55.7 fps in burst mode) over Gige Vision interfaces.
The GT1930L EF is a great solution in applications where the GT’s impressive housing temperature range of -30 to +70 °C is an advantage, Canon EF lens control is needed, or a tight sensor to mount planarity tolerance is required. Applications include outdoor imaging, traffic, high end security, MIL/Aerospace, machine vision and industrial inspection.
Key Features include
- Canon EF Lens control
- Rugged Design for extreme environments
- Power Over Ethernet (PoE)
- Camera temperature monitoring
- Extended Temperature range
- IEEE 1588 Precision Timing Protocol
- ROI capabilities
- Auto Exposure, Gain and White balance
- Reverse X/Y
- LUT Look up Tables
- IR cut filter options
For all your imaging needs, you can visit www.1stvision or contact us! to discuss your application in further detail.