Teledyne DALSA Cameras

Teledyne DALSA's family of industrial machine vision cameras offer GigE and camera link interfaces, with a wide variety of resolutions and frame rates. Area Scan and line scan cameras area available with the highest performance CMOS and CCD imaging sensors including Sony Pregius and Teledyne DALSA's own proprietary sensors.

Teledyne DALSA's TurboDrive is featured in several camera lines and is used to push past the gigabit Ethernet speed ceiling, allowing a GigE Vision cameras to send pixel information at a rate in excess of 125 MB/s and speeding up line and frame rates beyond the nominal link capacity. Learn more about TurboDrive.

For your other imaging & machine vision needs, check out DALSA's high performance frame grabbers, and AI training tool, Astrocyte.

	Blackfly S GigE Machine Vision Cameras GigE Vision compliant On-camera image processing includes color correction, lossless compression, lens shading correction Camera controls include sequencer, timers, counters, event notifications, and chunk data In-camera features (color correction, LUTs, shading correction) Read More... Compatible with Spinnaker SDK and third-party software High image quality with low noise and high dynamic range Long cable lengths (up to 100m) Ideal for distributed or multi-camera systems Supports Power over Ethernet (PoE) Sony and ON Semi sensors Available in C-mount and CS-mount models Board-level/OEM versions available		Blackfly S USB3 Machine Vision Cameras USB3 Vision compliant On-camera image processing include color correction, lossless compression, lens shading correction Camera controls include sequencer, timers, counters, event notifications, and chunk data Resolutions from <1 MP to 24+ MP Read More... High frame rates (200+ FPS models) On-camera processing (ROI, binning, LUT, gamma) reduces host load Compact 29 × 29 mm "ice cube" form factor Compatible with the Teledyne Spinnaker SDK and other third-party software Sony and ON Semi sensors Flexible GPIO and power options streamline system design Available in C-mount and CS-mount models Cost-effective USB3 connectivity reduces system complexity Features both automatic and precise manual control over image capture and on-camera pre-processing Board-level/OEM versions available
	Forge IP67 GigE Industrial Cameras IP67-rated industrial camera Protects against dust, water, moisture, and debris Reliable high-speed image capture GigE Vision interface for reliable long-distance image transmission Read More... Power over Ethernet (PoE) simplifies installation and reduces cabling Compact cylindrical housing minimizes dirt buildup and simplifies integration IEEE1588 synchronization supports multi-camera operation Lossless Compression (LLC) improves bandwidth efficiency and frame rates Compatible with Teledyne Spinnaker SDK, Sapera software and other GigEVision compliant software Ideal for food processing, smart agriculture, packaging, and factory automation C-mount lens mount		Forge 5GigE High-Speed Industrial Cameras High-speed imaging supported by up to 5GigE bandwidth Rapid image acquisition via burst capture up to 10 Gb/s High-resolution Sony Pregius CMOS sensor options Large 500 MB image buffer helps prevent dropped frames Read More... Rapid image acquisition via burst capture up to 10 Gb/s Large 500 MB image buffer helps prevent dropped frames Compact industrial design supports OEM and embedded vision systems Flexible network integration with 1GigE, 2.5GigE, and 5GigE multi-speed compatibility Simplified cabling and setup with PoE support Precise timing for multi-camera systems using IEEE1588 synchronization Compact industrial design supports OEM and embedded vision systems Seamless compatibility with the Teledyne Spinnaker SDK, Sapera software and other GigE Vision compliant software C-mount lens mount
	Forge 1GigE SWIR Cameras SWIR imaging from ∼ 400 nm to 1700 nm Sony SenSWIR InGaAs sensors Distortion-free images of fast-moving objects GigE Vision interface Read More... Detect moisture, contaminants, bruising, and material variations with higher contrast Compact industrial housing simplifies integration into machine vision systems High-speed image acquisition supports real-time inspection applications Advanced onboard tools include ROI, triggering, LUTs, and image correction Compatible with GigE Vision compliant software including the Teledyne Spinnaker SDK and Sapera software Ideal for semiconductor, food inspection, recycling, solar, and scientific imaging applications C-mount lens mount		Genie Nano GigE, 5GigE, and 10GigE Cameras VGA to 67MP 1Gbps, 2.5Gbps, 5Gbps, 10GigE interfaces Speeds up to 10Gbps (10GBASE-T) 90-500MB onboard memory buffer Read More... GigE Vision v2.0 compliant -20 to +60 deg. C operating temperature Clock synchronization (IEEE1588) 3-year warranty
	Genie Nano-CXP CoaXPress Cameras 16 to 25MP Frame rates from 80 to 120fps CoaXPress link speed 6.25 Gb/s - 4 data lanes Defective pixel replacement Up to 4096 entries Read More... GeniCam GenCP compliant -20 to +60 deg. C operating temperature 3-year warranty For highly cost effective, high-speed, high-resolution imaging		Linea, Linea2, Linea Lite, Linea ML, Linea HS Line, Linea HS2 Scan Cameras 2K to 32K resolution Up to 1000 kHz scan rate RGB color, monochrome, NIR, and multispectral options Low cost line scan models Read More... Up to 25 µm pixel size for high sensitivity M42 to M90, C, F lens mount options On board flat field correction
	Genie Nano Camera Link Cameras 5.1 to 25MP 2/3"-APS-H CMOS, Sony/OnSemi 5MP resolution @ 144 fps (IMX250) Extended -20-60 deg. operating temperature Read More... 32MB onboard flash memory GenICam GenCP compliant 3 year warranty		Piranha4 Camera Link Cameras High speed imaging - up to 200kHz Dual line scan monochrome, bilinear color, trilinear color, and quadlinear color line scan sensors Color, monochrome and multispectral cameras GenICam compliant Read More... Large full well capacity maximizes high dynamic range Low read noise and on chip CDS ensures superior signal to noise at low light
	Z-Trak 3D Laser Profiler Fully integrated 3D laser triangulation profiler Robust, FIR-Peak detector algorithm Factory calibrated for accurate real-time measurements IP67 enclosure for harsh operating conditions Read More... Up to 45k profiles/sec High performance, high speed 3D sensors for in-depth analysis and inspection GigE Vision compliant Includes Sapera Processing & Sherlock8 3D SDKs Red or blue eye safe laser options		AxCIS Line Scan Imaging Modules Compact, fully integrated line scan imaging modules High-speed & high-resolution Quadlinear CMOS sensor Camera Link HS Read More... Visible (400-700 nm), Near Infrared (700-1000 nm) spectrum Large field of view with no missing pixels HDR imaging with dual exposure mode Superior signal-to-noise ratio Available in color or monochrome
	CALIBIR GX2 LongWave InfraRed (LWIR) Thermal Cameras Radiometric operation for precise temperature output GigE vision and Genicam compliant Defective Pixel replacement Adaptive Image Enhancement Read More... IEEE1588-2008 Precision Time Protocol synchronization capable Built-in pseudo-color for enhanced visualization Compatible with Sapera™ LT software and Spinnaker software Internal mechanical shutter for remote recalibration		Falcon2 and Falcon4 Camera Link Cameras 4MP to 86MP resolution 1.1" to 3.2" CMOS global shutter Up to 1200 fps High dynamic range and responsivity Read More... Global Shutter High resolution & high-speed imaging 1000x anti blooming M42 and M95 optics mounts Vertical windowing
	Lumenera LT-series USB3.1 Gen1 Cameras Sony Pregius & STARVIS 1.7MP to 20MP sensors Extremely low noise & high sensitivity USB3.1 Gen1 to 5 Mb/sec USB3 Vision-compliant Read More... Board-level configurations for embedded systems Operating temperature from 0 to 50° Choice of DALSA Sapera LT or LuCam SDKs for Windows or Linux 128MB onboard memory buffer 3-year warranty Starting at< $300 in OEM quantities

Legacy Products
Not recommended for new designs

	Genie GigE Cameras VGA to 2MP 1/3"-2/3" CCD/CMOS, Sony/OnSemi Up to 64 fps Industry standard 44 x 29 x 67mm Read More... Low cost models Clock synchronization (IEEE1588) Direct show software interface GigEVision compliant		Genie TS GigE cameras 2.2 to 12.6MP 2/3"-APS-H CCD/CMOS, CMOSIS, DALSA, OnSemi Up to 70 fps, burst mode Extended -20-60 deg. operating temperature Read More... Up to 512MB onboard memory Clock synchronization (IEEE1588) 3 year warranty
	Spyder Camera Link and GigE Cameras 512 to 4K Dual line technology for high sensitivity Up to 68 kHz scan rate 5 to 14um pixel size Read More... Broadband responsivity up to 408 DN /(nJ/cm2) M42 to M58 mount, C-/F-mount options On board flat field correction

Teledyne DALSA
Camera Resources

Click to see our wide selection of camera accessories

Camera Accessories

Trigger-to-Image Reliability Framework Primer PDF

Trigger-to-Image Reliability
Framework Primer

TurboDrive Spotlight

Why you should use Dalsa’
Turbodrive technology

Introducing the Genie Nano camera

Introducing the Linea line scan camera

Genie Nano CXP
Engineered for Full Throttle Performance

Line Scan Primer

1stVision offers machine vision components and solutions for factory automation, medical imaging, scientific instrumentation, and industrial machine vision applications. Our machine vision product portfolio offers the industry’s most comprehensive selection of industrial cameras, factory automation lenses, frame grabbers, LED lighting, and machine vision & image analysis software from the industry’s best machine vision component manufacturers.