Of course we supply the power supplies. Do you need the Hirose to include the camera’s power and trigger, too?

Camera 12 V Power Supply - PSS-610-06

For all industrial cameras that take power via 12V Pin Hirose: Allied Vision, Sony, JAI, Basler, Dalsa, Teli, Toshiba.

Datasheet

12 V Power Supply for IDS GigE SE and CP Rev.1 Cameras - PSS-IDS-GIGE-SE

This is a 12 V supply with a 6&squot; cable to a 6 Pin Hirose Connector specifically for the IDS GigE SE and CP1 cameras series (CP2 uses 8 Pin Hirose).

12 V Power Supply for Allied Vision Mako GigE Cameras PSS-HIR8TPS

This is a 12 V supply with a 6’ cable to an 8 Pin Hirose Connector specifically for the Allied Vision Mako cameras series.

12 V Power Supply with Strobe & Trigger for Prosilica GC series - PSS-P-1H2BST-6

This is a 12 V supply with a 6' cable to a 12 Pin Hirose Connector. 2 BNC 6" pigtails come out of the hirose and are wired for trigger and strobe signals for either the Dalsa Genie GigE or JAI C3 Gige camera series. Separate PN for each manufacturer.

Datasheet

12 V Power Supply 6’ cable to flying leads - PSS-ST

12V 1A wall wort 6’ cable stripped and tinned leads

12 V Power Supply with Strobe & Trigger for Genie - PSS-G-1H2BST-06

This is a 12V power supply with 6' cable to a 12 pin Hirose connector. Two BNC 6" pigtails come out of the Hirose and are wired for trigger and strobe signals for Dalsa Genie cameras This power supply replaces PN: PSWT-G-1H2BST-15 providing identical functionality, but with a 6' power cord.

Power over Ethernet Injector - PS-POE-INJ20W

POE Injector specifically for GigE cameras from Allied Vision, Dalsa and IDS. Comes with power cord.

DatasheetWhat you need to know about PoE

Wall mount Power Supply for Dalsa 6 pin (Sypder Piranha HS Falcon etc.) cameras
PS-AC-PS-0400W

12 V 1.5A regulated switching (110-240V input) wall mount supply for MOST Dalsa cameras with 6 pin Hirose connector. NOT for HS08k80 nor Pantera 1M30/60.

Desktop Power Supply for Dalsa 6 pin (Sypder Piranha HS Falcon etc.) cameras
PS-AC-PS-0400D

12 V 2A regulated desktop supply for ALL Dalsa cameras with a 6 pin Hirose connector. This is a direct replacement for the AC-PS-0400 Dalsa was making.