IDS peak 2.17.1 / uEye+ firmware 3.70
IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.
The UART functionality is only available for cameras that support UART communication on the hardware. This feature is only supported by the following uEye+ cameras.
•USB 3 uEye+ XCP Rev. 1.2
•USB 3 uEye+ XLE Rev. 1.2
•USB 3 uEye+ XLS Rev. 1.2
The hardware must be Rev. 1.2 (or higher), as UART support is included from this hardware on. The description of the GPIO (General Purpose I/O) can be found in the camera manual of the respective camera family.
Subcategory that contains all the data features that are related to an event which will be generated when the UART Rx module has received a packet.
This data features are:
Event Uart Rx Packet Current Frame Id
Event Uart Rx Packet Length Received
Event Uart Rx Packet Timestamp
Name |
EventUartRxPacketData |
Category |
|
Interface |
Sub-Category |
Access |
Read |
Unit |
- |
Visibility |
Beginner |
Values |
- |
Standard |
IDS |
Availability uEye+ |
|
Availability uEye |
- |
