Please enable JavaScript to view this site.

IDS peak 2.17.1 / uEye+ firmware 3.70

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

The UART functionality is only available for cameras that support UART communication on the hardware. This feature is only supported by the following uEye+ cameras.

USB 3 uEye+ XCP Rev. 1.2

USB 3 uEye+ XLE Rev. 1.2

USB 3 uEye+ XLS Rev. 1.2

The hardware must be Rev. 1.2 (or higher), as UART support is included from this hardware on. The description of the GPIO (General Purpose I/O) can be found in the camera manual of the respective camera family.

Event identifier whose value uniquely defines an event, that is generated when the UART Rx module has received a packet. The identifier can be used to program a callback function that is informed about the occurrence of the event.

Name

EventUartRxPacket

Category

EventUartRxPacketData

Interface

Port

Access

Read/Write

Unit

-

Visibility

Beginner

Values

-

Standard

IDS

Availability uEye+

icon-u3v

Availability uEye

-

© 2025 IDS Imaging Development Systems GmbH