IDS peak 2.17.1 / uEye+ firmware 3.70

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

The UART functionality is only available for cameras that support UART communication on the hardware. This feature is only supported by the following uEye+ cameras.

•USB 3 uEye+ XCP Rev. 1.2

•USB 3 uEye+ XLE Rev. 1.2

•USB 3 uEye+ XLS Rev. 1.2

The hardware must be Rev. 1.2 (or higher), as UART support is included from this hardware on. The description of the GPIO (General Purpose I/O) can be found in the camera manual of the respective camera family.

Returns the frame ID of the frame that was transmitted when the trigger for UartRxWrapUpPacket was received. If you do not use a trigger, this is 0xFFFFFFFFFFFFFFFF. If the UART reception is terminated via a full packet instead of via the trigger, EventUartRxPacketCurrentFrameId is not updated but displays the previous value.