GigE Camera Accessories
Click images to enlarge
12 V Power Supply with Strobe & Trigger for Prosilica GC series - PSS-P-1H2BST-6
This is a 12 V supply with a 6' cable to a 12 Pin Hirose Connector. 2 BNC 6" pigtails come out of the hirose and are wired for trigger and strobe signals for either the Dalsa Genie GigE or JAI C3 Gige camera series. Separate PN for each manufacturer.
12 V Power Supply with Strobe & Trigger for Genie - PSS-G-1H2BST-06
This is a 12V power supply with 6' cable to a 12 pin Hirose connector. Two BNC 6" pigtails come out of the Hirose and are wired for trigger and strobe signals for Dalsa Genie cameras This power supply replaces PN: PSWT-G-1H2BST-15 providing identical functionality, but with a 6' power cord.
GigE High Performance Data Cables
GigE male A to male micro B with screw locks from Alysium-Tech. Cables are high performance, Cat6A and 10GigE compliant. The cables have a unique 40 in 1 assembly design allowing screw locking in any position. HiFlex cables are available with lengths up to > 50 meters. Standard lengths of 1,3,5, 10 and 20 meters readily available, custom lengths upon request.
Datasheets and detailed information
Genie Nano I/O flying leads cable
Genie Nano I/O flying leads cable. 10 pin Santec to flying leads for use with Dalsa Nano Cameras. User to provide +12V/24V and GND.
IO Cable 12 Pin Hirose to Open - CB-IO-xM
12 Pin female Hirose to bare wires 8" flying leads, for For all 12 pin hirose cameras. 2,3,5,10 meter lengths available (custom lengths upon request). You must wire in power from a supply unless you have a POE camera.
Note: PINOUTS PER CONDUCTOR COLOR HAVE CHANGED - Please refer to the proper document per your cable jacket color.
Technical Diagram: Black I/O Cable - Rev 7 effective 3/15/16
IO Cable 6 Pin Hirose to Open - CB-HIR6-I/O-xM
6 Pin Hirose to bare wires; flying leads for all 6 pin hirose cameras. 2, 3, 5 meter lengths available. You must wire in power from a supply unless you have a POE camera.
IO data cable 8 Pin Hirose to open for USB3 IDS & Allied Vision Mako GigE cameras - CB-HIR8-IO
IO cable with an 8 pin female connector to flying leads in 2, 3, 5, or 10 meter lengths (custom lengths upon request). For cameras with an 8 pin male connector (e.g. IDS USB3 CP)
Dual GigE POE PCIe x4 NIC card - Neousys NEO-PCIE-POE352AT
POE Dual NIC card with Intel® I350-AM4 server-grade chipsets. If you have 2 POE cameras the NEO-PCIE-POE352AT card is a very cost effective way to interface and power the cameras.
What you need to know about PoE
Quad GigE POE PCIe x4 NIC card - Neousys NEO-PCIE-POE354AT
POE Quad NIC card with Intel® I350-AM4 server-grade chipsets. If you have 4 POE cameras the NEO-PCIE-POE354AT card is the most cost effective way to interface and power the cameras.
What you need to know about PoE
Intel Pro 1000 GigE Adapter Card PCIe
Intel Pro 1000 Host Adapter Single Enet PCIe. Needed for high performance drivers when using GigE cameras. Can also be used with any filter driver solution.
Intel Pro 1000 GigE Dual NIC Adapter Card PCIe
Intel Pro 1000 Dual Host Adapter 2 Enet ports PCIe. Needed for high performance drivers when using GigE cameras. Can also be used with any filter driver solution. Do NOT use 4 port NIC card when using 4 cameras use 2 of these dual NIC adapters.