IDS Software Suite 4.96.1

Sensor

•At very long exposure times and minimum gain, the white level might not be reached. Increase the gain by one step.

•For AOI width <160 pixels, the sensor gets slower.

•Horizontal and vertical binning can only be used together.

•The sensor binning works by averaging pixels, so the image will not become brighter when binning is activated.

•When you are using a master gain setting of 72 or higher, we recommend the following RGB gain settings to avoid color errors: Set at least one RGB gain to 0. Set each of the other two RGB gains to a value less than 50.

•Homogeneous images may show color aberrations in the corner areas. This is caused by the way the micro lenses are placed on this sensor. The effect can be minimized by using a large aperture on the lens (small F number).

Binning

•Binning can only be enabled for both horizontal and vertical pixels. For this reason, the parameters of the is_SetBinning() function have to be passed together (IS_BINNING_2X_VERTICAL | IS_BINNING_2X_HORIZONTAL) to enable binning. Passing only one parameter might result in undesired settings.