IDS peak 2.8.0 / uEye+ firmware 3.33
This chapter describes the functions of the uEye Parameterset Control category, which allows you to load the parameter set of a uEye camera from a file or save it to a file (ini file).
Name |
UEyeParametersetControl |
Category |
Root |
Interface |
Category |
Access |
Read |
Unit |
- |
Visibility |
Beginner |
Values |
- |
Standard |
IDS |
Availability uEye+ |
- |
Availability uEye |
|
•Specify the path to the ini file in uEyeParametersetPath.
•Use uEyeParametersetLoad to load a parameter set from an ini file.
•Use uEyeParametersetSave to save a parameter set to an ini file.
Important notes
•When creating the ini file you have to take care that this version of IDS peak does not support the full functionality of the uEye cameras. For example, a RAW Bayer pixel format should be set for a color camera. Further notes can be found under D: Operating uEye cameras with IDS peak > Notes for usage.
•Only camera-specific ini files can be loaded.
•When loading an ini file, make sure that previously allocated buffers match the parameters of the ini file in relation to image size (ROI) and color depth. Otherwise, display errors may occur.
