IDS peak 2.20.0 / uEye+ firmware 3.80
IDS Peak comfortSDK, genericSDK, AFL, ICL, and IPL developer manuals are external documents.
Please contact us if you need these manuals.
USB 3 uEye CP Rev. 2 with enabled image memory only: The image was not transferred.
Possible cause/remedy:
Not enough free bandwidth on the interface for transferring the image.
•Reduce the transferred data, e. g. by reducing the frame rate or selecting another color format.
•Operate fewer cameras simultaneously on a USB bus.
Name |
IS_CAP_STATUS_DEV_FRAME_CAPTURE_FAILED |
Category |
|
Interface |
Integer |
Access |
Read |
Unit |
- |
Visibility |
Expert |
Values |
0 … 4294967295 Increment: 1 |
Standard |
IDS |
Availability uEye+ |
- |
Availability uEye |
|
Code example
C++
// Determine the current IS_CAP_STATUS_DEV_FRAME_CAPTURE_FAILED
int64_t value = nodeMapDataStream->FindNode<peak::core::nodes::IntegerNode>("IS_CAP_STATUS_DEV_FRAME_CAPTURE_FAILED")->Value();
C#
// Determine the current IS_CAP_STATUS_DEV_FRAME_CAPTURE_FAILED
long value = nodeMapDataStream.FindNode<IDSImaging.Peak.API.Core.Nodes.IntegerNode>("IS_CAP_STATUS_DEV_FRAME_CAPTURE_FAILED").Value();
Python
# Determine the current IS_CAP_STATUS_DEV_FRAME_CAPTURE_FAILED (int)
value = nodeMapDataStream.FindNode("IS_CAP_STATUS_DEV_FRAME_CAPTURE_FAILED").Value()
