IDS peak 2.8.0 / uEye+ firmware 3.33

Returns the current gateway IP address of the GVCP interface of the selected RemoteDevice. This value only changes on execution of the DeviceUpdateList command.

Code Example

C++

// Before accessing GevDeviceGateway, make sure DeviceSelector is set correctly
// Set DeviceSelector to 0
nodeMapInterface->FindNode<peak::core::nodes::IntegerNode>("DeviceSelector")->SetValue(0);
// Determine the current GevDeviceGateway
int64_t value = nodeMapInterface->FindNode<peak::core::nodes::IntegerNode>("GevDeviceGateway")->Value();

C#

// Before accessing GevDeviceGateway, make sure DeviceSelector is set correctly
// Set DeviceSelector to 0
nodeMapInterface.FindNode<peak.core.nodes.IntegerNode>("DeviceSelector").SetValue(0);
// Determine the current GevDeviceGateway
long value = nodeMapInterface.FindNode<peak.core.nodes.IntegerNode>("GevDeviceGateway").Value();

Python

# Before accessing GevDeviceGateway, make sure DeviceSelector is set correctly
# Set DeviceSelector to 0 (int)
nodeMapInterface.FindNode("DeviceSelector").SetValue(0)
# Determine the current GevDeviceGateway (int)
value = nodeMapInterface.FindNode("GevDeviceGateway").Value()