IDS peak 2.8.0 / uEye+ firmware 3.33

ROI

•The frame rate does not increase by the use of a ROI.

Binning

•The model only supports FPGA binning and no sensor binning.

•The frame rate does not increase with binning.

Decimation

•The model only supports FPGA decimation and no sensor decimation.

•The frame rate does not increase with decimation.

Trigger

•The maximum frame rate in trigger mode is about half of the maximum frame rate in freerun mode.

•The model does not support trigger controlled exposure, see ExposureMode "TriggerControlled".

•The model has a time delay between trigger and flash. If a 5 Hz trigger signal is applied to Line0, Line1 goes to "high" with a time delay.

Black level

•Only deactivate the sensor's own automatic black level control if you carefully evaluate the camera's operation afterwards, as this may cause deviating image quality. It is recommended to use the sensor's own black level control.

Pixel format

•Due to the manufacturer, the minimum and maximum pixel values are not used for the sensor pixel formats. For example, in a 12-bit pixel format, only the value 4094 is reached for saturation, but not 4095.