GigE Camera Accessories

Power Supplies   Cables   NICS

---

Click images to enlarge

Power Supplies 

12 V Power Supply PSS-61006
For all cameras that take power via 12 Pin Hirose: AVT, Sony, JAI, Basler, Dalsa, Teli, Toshiba.

---

12 V Power Supply for IDS GigE SE Cameras PSS-IDS-GE-SE
This is a 12 V supply with a 6' cable to a 6 Pin Hirose Connector specifically for the IDS GigE SE cameras series.

Datasheet

---

12 V Power Supply with Strobe & Trigger for Prosilica GC series
This is a 12 V supply with a 6' cable to a 12 Pin Hirose Connector. 2 BNC 6" pigtails come out of the hirose and are wired for trigger and strobe signals for either the Dalsa Genie GigE, or JAI C3 Gige camera series. Separate PN for each manufacturer.

Datasheet

---

12 V Power Supply with Strobe & Trigger for Genie
This is a 12 V supply with a 6’ cable to a 12 Pin Hirose Connector. 2 BNC 6" pigtails come out of the hirose and are wired for trigger and strobe signals for either the Dalsa Genie GigE.

---

Power over Ethernet Injector PS-POE-INJEC  

POE Injector specifically for GigE cameras from AVT, Dalsa, and IDS.Comes with power cord.

PoE Info Datasheet

---

Cables 

IO Cable 6 Pin Hirose to Open CB-IDS-TRIG-GE-xM
6 Pin Hirose to bare wires 8" flying leads, for all 6 pin hirose cameras. 2,3,5,10 meter lengths available. You must wire in power from a supply unless you have a POE camera.

---

IO Cable 12 Pin Hirose to Open
12 Pin Hirose to bare wires 8" flying leads, for For all 12 pin hirose cameras. 2,3,5,10 meter lengths available. You must wire in power from a supply unless you have a POE camera.

---

12 Pin Hirose to IO for Genie & C3 GigE
12 Pin Hirose to 4 BNC and leads for power for either Dalsa Genie GigE or JAI C3 GigE. 4 BNCs for each IO line plus 2 wires for connecting to a power supply. Separate PN for each manufacturer.

---

NICS 

Dual GigE POE PCIe NIC card POE-2
POE Dual NIC card with Intel Pro 1000 chipsets. If you have 2 POE cameras, a very cost effective way to interface and power them.

PoE Info Datasheet

---

Intel Pro 1000 GigE Adapter Card PCI or PCIe
Intel Pro 1000 Host Adapter, Single Enet port, PCI or PCIe. Needed for high performance drivers when using GigE cameras with a Pleora GigE interface. Can also be used with any filter driver solution.

Datasheet

---

Intel Pro 1000 GigE Dual NIC Adapter Card PCIe
Intel Pro 1000 Dual Host Adapter, 2 Enet ports, PCIe. Needed for high performance drivers when using GigE cameras with a Pleora GigE interface. Can also be used with any filter driver solution. Do NOT use 4 port NIC card when using 4 cameras, use 2 of these dual NIC adapters.

Datasheet

---

Tripod Adapter
Tripod Adapter for Dalsa Genie or JAI C3 GigE cameras. 1/4-20 Standard tripod Adapter.